Syslog Config; Config Setting - Fanvil BW210 User Manual

Username
Password
Config File Name
Config Encrypt Key
Protocol Type
Update Interval Time
Update Mode

4.3.5.2. Syslog Config

Syslog is a protocol which is used to record the log messages with client/server mechanism. Syslog server
receives the messages from clients, and classifies them based on priority and type. Then these messages will
be written into log by some rules which administrator can configure. This is a better way for log management.
8 levels in debug information:
Level 0---emergency: This is highest default debug info level. You system can not work.
Level 1---alert: Your system has deadly problem.
Level 2---critical: Your system has serious problem.
Level 3---error: The error will affect your system working.
Level 4---warning: There are some potential dangers. But your system can work.
Level 5---notice: Your system works well in special condition, but you need to check its working
environment and parameter.
Level 6---info: the daily debugging info.
Level 7---debug: the lowest debug info. Professional debugging info from R&D person.
At present, the lowest level of debug information send to Syslog is info, debug level only can be displayed
on telnet.
Field name
Server IP
Server Port
MGR Log Level
SIP Log Level
IAX2 Log Level
Enable Syslog

4.3.5.3. Config Setting

Set FTP server Username. System will use anonymous if username
keep blank.
Set FTP server Password.
Set configuration file's name which need to update. System will use
MAC as config file name if config file name keep blank. For
example, 000102030405.。
Input the Encrypt Key, if the configuration file is encrypted.
Select the Protocol type FTP、TFTP or HTTP.
Set update interval time, unit is hour.
Different update modes:
1. Disable: means no update
2. Update after reboot: means update after reboot.
3. Update at time interval: means periodic update.
Syslog Configuration
Set Syslog server IP address.
Set Syslog server port.
Set the level of MGR log.
Set the level of SIP log.
Set the level of IAX2 log.
Select it or not to enable or disable syslog.
explanation
41