Table of Contents
Advertisement
Correct POE injector placement
In order to avoid the problem mentioned above, please place the POE injector
higher than the Ethernet cable, so that the raindrop will not permeate the POE
injector.
Attention:
The cable distance between the Router and PC/hub/Switch should
not exceed 100 meters.
Make sure the wiring is correct. In 10Mbps operation, Category
3/4/5 cable can be used for connection. To reliably operate your
network at 100Mbps, you must use Category 5 cable, or better
Data Grade.
8
Advertisement
Table of Contents
