Table of Contents
Advertisement
Connection Status -
Connection – This column show current connection status. If AP already
connect to an Access Point or station, here will show the MAC address of
the associated Access Point or station. Otherwise, connection column will
show "N/A" which means no connection to any Access Point or station.
Network Type – Here indicates the Access Point works in AP mode or
Client mode (Infrastructure mode / Ad Hoc mode)
SSID – SSID column displays current SSID assigned to the AP
BSSID – This column displays the MAC address of the connected device.
Wireless Mode – Here show the Access Point current work in either 11b
or 11g mode
Current Channel – This column indicates the radio channel currently in
use.
Security – Here indicates AP security settings in client mode. Should be
either "Disabled", "WEP" or 'WPA-PSK".
Rx Data Rate(Mbps) –show the current Rx Data rate status
Tx Data Rate(Mbps) –show the current Tx Data rate status
Current noise level –This column shows current link quality with AP by
noise level in 0 to -96 dBm scale.
Signal strength – This column shows current link quality with AP by
signal strength in 0 to -96 dBm scale.
Activity (Packets Rx) –show the current Rx packets
Activity (Packets Tx) –show the current Rx packets
34
Advertisement
Table of Contents
