Table of Contents
Advertisement
Allow 2.4GHz 54Mbps Stations Only – Default setting is "Disable".
Select "Enable" all of your wireless clients are 802.11g mode, if you select
"Disable" using both 802.11b and 802.11g wireless clients.
Short Preamble – Preambles are a sequence of binary bits that help the
receivers synchronize and ready for receipt of a data transmission. Some
older wireless systems like 802.11b implementation use shorter preambles.
If you are having difficulty connecting to an older 802.11b device, try to
enable short preamble.
Protection Mode – Protection Mode should remain default value (Auto)
unless you are having severe problems with your 11g Wireless LAN
products not being able to transmit to the Access Point in an environment
with heavy 802.11b traffic. To enable this function boosts the Access
Point's ability to catch all 11g Wireless transmissions but will severely
decrease performance.
Distance (1-30) – Setup "Distance" according to the longest link
distance between the point to point or point to multi-point in the network.
The input needs to be greater than or equal to the real distance. The range
1KM to 30KM
can be from
mode
.
Remember to click on "Apply" to make sure all changes are made before
leaving this page.
normal mode
for
25
1KM to 15 KM
and
Super
in
Advertisement
Table of Contents
