Table of Contents
Advertisement
Appendix B: Specification
Standard support
Interface
SDRAM
Flash
Max. Bandwidth
Wireless Setting
Wireless Security
IEEE802.11b
IEEE802.11g
IEEE802.3
IEEE802.3u
Wireless IEEE802.11b/g
One 10/100 RJ-45 port
8Mbyte
2Mbyte
Ethernet
Full Duplex: 200Mbps (for 100BASETX), 20Mbps (for 10BaseT)
Half Duplex: 100Mbps (for 100BaseTX), 10Mbps (for 10BaseT)
1, 2, 5.5, 6, 9, 11, 12, 24, 36, 48, 54, 108Mbps
Wireless
Operation Mode – AP / Wireless Client / Repeater / Wireless
−
Bridge Point to Point and Point to Multi-Point Mode
SSID
−
Channel Selection
−
Transmission Rate (Best, 108, 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5,
−
2, 1) in Mbps
Transmit power (Full, Half, Quarter, Eighth, Minimum)
−
Beacon Interval (20-1000): 100
−
Data Beacon Rate (DTIM (1-16384): 1
−
Fragment Length (256-2346): 2346
−
RTS Threshold (256-2346): 2346
−
Short Preamble: Enable
−
Allow 2.4GHz 54Mbps Station Only
−
Protection Mode: Auto / Enable / Disable
−
eXtended Range
−
Distance
−
WEP setting
Authentication type: Open System / Shared Key
−
Shared keys input type: HEX / ASCII
−
Shared keys length: (64-bit, 128-bit, 152-bit)
−
Default WEP Key to use (1-4)
−
WPA-PSK setting
46
Auto Fall-Back
Advertisement
Table of Contents
