Advertisement
11. MAINTENANCE
Cleaning the Body of the laminator
1.To clean the machine body, dampen a cloth with water only and gently wipe the
machine clean.
Removing Adhesive Build Up
1. Remove the film from the laminator.
2. Use a damp (water only) cloth and a rubber gum eraser to remove the adhesive on the
Teflon (metal) and silicone rollers.
Note: Rub firmly but do not scrub the rollers vigorously as this may scratch the surface.
Do not use sharp metal objects, steel wool, or abrasives, as these
may also damage the rollers.
Lubrication
1. Drive chain and sprockets should be lubricated with either a light coat of gear lube or
heavy grease (lithium grease) after 6 months or 1000 hours of operation, whichever
comes first.
12. TROUBLESHOOTING
Symptom
Cause
a. Power plug is not plugged in.
Machine will not turn
b. Power switch is in "0" (Off) position.
on:
c. Tripped circuit breaker.
d. Blown main power fuse.
a. Emergency switch(es) is (are) engaged.
There is power, but the
rollers are not turning
b. Paper guide is not installed correctly.
after the "RUN" button
is pressed:
c. Blown motor fuse.
a. Upward curl.
Curled lamination:
b. Downward curl.
Possible Solution
a. Plug the power cord into appropriate
outlet.
b. Put the power switch to the "I" (On)
position.
c. Reset the circuit breaker.
d. Replace the fuse.
a. Disengage the emergency switch(es).
b. Properly install the paper guide so that
the micro switch is activated.
d. Replace the motor fuse.
a. Loosen the top roll film tension.
b. Loosen the bottom roll film tension.
11
13. SPECIFICATIONS
Description
Power supply
Power consumption
Max laminating width
Film thickness
Max laminating speed
Driving motor
Speed control
Transport type
Film core size
Cold lamination
Mounting thickness
Take up system
Reverse
Remote control
Foot pedal
Unit dimensions
(w x d x h)
Unit weight
Carton dimensions
(w x d x h)
Gross Weight
12
RSC-1650CLT
RSC-1650CLT
AC 100~120V,220~240V 50/60Hz
90W
1650mm / 65"
50~250 mic / 1~7mil
3m/min / 9.9ft/min
DC geared
9 settings
2 Roller
Auto grip (2",3")
Yes
7mm / 0.3"
No
Yes
No
Yes
1950 x 550 x 1110 (mm)
77" x 21.6" x 43.7"
160kg / 354lbs
2178 x 814 x 710(mm)
85.7" x 32" x 28"
180kg / 398lbs
Advertisement
