SAMBA 55/56
Serial interface (USB):
Phonebook management:
Ringing tones:
Real time clock:
Timer function:
2.2.1 Power consumption
900
57
GSM
195
232
GPRS
Table 1: The average power consumption at 5V ± 5%
Coding scheme
CS-1:
CS-2:
CS-3:
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Handsfree operation:
Echo cancellation
Noise reduction
Remote control by AT commands (GSM
07.07 and 07.05)
Baud rate: 300 bps ... 115,200 bits/s
Full USB and USB 2 compatibility
Firmware upgrade: Over USB interface and SIM
interface
Supported phonebook types: SM, FD, LD, MC,
RC, ON, ME
Offers
tones/melodies,
command
Implemented
Programmable via AT command
Average current (in mA at 5 V ± 5%):
1800
MHz
57
mA
143
mA
166
mA
in transmit mode at power level 5/0 (maximum)
in receive/transmit mode at maximum power
423
mA
level 5 (3 x downstream +2 x upstream using
1 Timeslot
9.05 kbps
13.4 kbps
15.6 kbps
a
choice
of
easily
GSM band
in idle mode (base station sends at -85 dBm)
in transmit mode at power level 7/3
Coding Scheme: CS-4)
2 Timeslots
18.1 kbps
26.8 kbps
31.2 kbps
VERSION 1.07
7
different
ringing
selectable
with
AT
4 Timeslots
36.2 kbps
53.6 kbps
62.4 kbps
Page 14
Need help?
Do you have a question about the SAMBA 55 and is the answer not in the manual?
Questions and answers