Connections Tab - HTC PHAR100 User Manual

Getting Started 47

Connections tab

Icon Description
Beam Set your device to receive incoming Bluetooth beams.
Bluetooth Turn Bluetooth on, set your device to visible mode, and scan
for other Bluetooth devices.
Comm Manager Manage your device's connections (including GPRS
and Bluetooth), turn the phone on or off, and enable or disable the Direct
Push function.
Connection Setup Configure your device's data connections, such
as GPRS, WAP, and MMS, based on the detected or selected network
operator. See Chapter 10 for details.
Connections Set up one or more types of modem connections for your
device, such as phone dial-up, GPRS, and more, so that your device can
connect to the Internet or a private local network.
CSD Line Type Set the line type to use when making a circuit switch
data (CSD) connection. Normally, you do not need to change the setting
unless you encounter a problem on establishing a connection.
GPRS Setting Set the GPRS authentication method.
Network Cards Set up your device's network card, if you installed one.
SMS Service Enables sending of SMS text messages via a data
connection, such as GPRS or a circuit-switched connection.
USB to PC Set a USB serial connection between your device and PC
when there are problems connecting ActiveSync.