Table of Contents
Advertisement
146 Getting Connected
10.4 Starting a Data Connection
After setting up a data connection such as GPRS or ISP dial-up on your
device, you can now connect your device to the Internet. The connection
is started automatically when you begin using a program that accesses the
Internet such as Internet Explorer® Mobile.
To manually start a data connection
If you have set up multiple types of data connections on your device, you
can manually start a connection.
1.
Tap Start > Settings > Connections tab > Connections.
2.
Tap Manage existing connections.
3.
Tap and hold the name of the desired connection, then tap Connect.
To disconnect active data connections
1.
Tap Start > Programs > Comm Manager.
2.
Tap the Data Connection button.
Note
10.5 Internet Explorer® Mobile
Internet Explorer® Mobile is a full-featured Internet browser, optimized for
use on your device.
To open Internet Explorer® Mobile
•
Tap Start > Internet Explorer.
To go to a Web site
•
Enter the Web site address in the address bar, then tap
You cannot reconnect a data connection in Comm Manager.
.
Advertisement
Table of Contents
