TMC AI5TT User Manual page 55

Video Off Method
This field defines the Video Off features. There are three options.
V/H SYNC + Blank
DPMS
Blank Screen
Video Off After
This field specifies the mode after which the Video Off feature is
enabled. The options are Doze, Standby, Suspend, and N/A.
Doze Mode
When enabled, and after the set time of system inactivity, the CPU
clock will run at a slower speed while all other devices still operate at
full speed.
Standby Mode
When enabled, and after the set time of system inactivity, the fixed disk
drive and the video would be shut off while all other devices still
operate at full speed.
Suspend Mode
When enabled, and after the set time of system inactivity, all devices
except the CPU will be shut off.
HDD Power Down
When enabled, and after the set time of system inactivity, the hard disk
drive will be powered down while all other devices remain active.
VGA Active Monitor
This option specifies if the BIOS is to monitor activity on the display
monitor for power conservation purposes.
Soft-Off by PWR-BTTN
This field specifies the power-off mode of the ATX system. The Instant
Off Mode allows powering off immediately upon pressing the power
button. In the Delay 4 Secs Mode, the system powers off after pressing
the power button for more than four seconds. By default, this field is set
to Instant Off Mode.
AI5TT Pentium Baby AT Motherboard User's Manual
Chapter 6 BIOS Configuration
Default setting, blank the screen and turn
off vertical and horizontal scanning.
Allows the BIOS to control the video
display card if it supports the DPMS
feature.
This option only writes blanks to the video
buffer.
51