Table of Contents
Advertisement
Preparations
4
Press the LOCK (CHOP) button.
The set station number is registered
Key label indications
It is recommended to write the source, destination or
level name on the labels (these are called key labels),
and attach them on the source/destination select
buttons. Then you can see at a glance what functions
you have assigned to each button.
Making a key label
1
Copy the key label guide shown below onto a sheet
of OHP paper.
Key label guide
For a large button (14 × 14 mm)
14 mm
For a small button (9.5 × 9.5 mm)
9.5 mm
14
2
Write the name on the copied paper.
3
Cut the paper to the button size as shown below.
Cut along the broken line.
VTR 1
CAM 3
Advertisement
Table of Contents
