Table of Contents
Advertisement
Operations
Select the destination first, then the source, following
the procedure below.
Before starting operation, turn the power to the unit
and the system on. Then check that the PROT button
is not lit.
Selecting a destination and source
1
Press one of the destination select buttons to select
a destination.
The pressed button lights in bright amber.
If no destination select function has been set on
this unit, this step is not necessary (the destination
set at the control terminal is automatically
selected).
2
Press one of the source select buttons to select a
source.
The pressed button lights in bright green, and the
crosspoint, including the selected source, is
switched.
Conditions of the source select buttons
when a destination is selected
In status display lamp-light mode, a source selected for
the destination that is currently selected is always
displayed.
When there is a source button selected for the
destination on the panel
The source button selected for the destination is lit in
bright green.
When there is no source button selected for the
destination on the panel
All the source buttons are lit in dim green.
Selecting when the unit is connected to
the monitor S-BUS data link
When you wish to monitor the input and output signals
of the DVS-V3232M/V6464M Video Routing
Switcher with an optional BKDS-V3292B Monitor
Board installed or the DVS-128, you may switch the
monitor signals using the BKS-R3219. Before
switching signals with this unit, you should make the
signal settings at the control terminal.
For details on making the settings, refer to the Installation
Manual supplied with the routing switcher.
Lighting status of the source/destination
select buttons
The source select buttons are normally lit in dim green,
and the destination select buttons are lit in dim amber.
When you press a button for selecting a signal to be
monitored, the pressed source or destination button
lights in bright green.
Error indication
When trouble occurs with this unit, the STATUS
button blinks in red.
17
Advertisement
Table of Contents
