Installing The Canopy - Hunter Lakeway 52582 Installation Manual

From receiver
Connect wiring harness from ceiling
bracket to the wiring harness from the
receiver. Match up the colored wires.
Ceiling Bracket Downrod
Making Connections for the Receiver and the Fan
Connect the wiring harness from fan to the
wiring harness from the receiver. Match
up the colored wires. The blue and white
wiring harness will not be needed.

Installing the Canopy

Lift the canopy into place so that
the screw holes are aligned.
Hanging Fan
Insert the two canopy screws
found in the
Wiring Canopy
From receiver (not needed)
From receiver
From fan
Connect the grounding wire plug from the
downrod to the grounding wire plug from
the ceiling bracket.
hardware bag.
bag
Blades
1886
x2
Canopy
Screw
6
Control