Joystick Error - R-Net - Permobil M300 Owner's Manual

Owner´s Manual Permobil M300
Joystick Error - R-Net Control System
If the joystick is moved from the central position before, during or immediately
after the control system is switched on, the screen image for a shifted joystick will
be displayed for 5 seconds. On control panels without a display, the LEDs on the
battery voltage indicator will "wander" backwards and forwards instead. If the joy-
stick is not released during this time, a joystick error will be registered and the
wheelchair will not drive. To enable the wheelchair to drive again, ensure that the
joystick is in the central position. Then switch the wheelchair off and on again.
If R-Net detects an error in the wheelchair electronics which needs attention, a
"Diagnostics screen" will appear on control panels with display. See example
below. On control panels without display, the battery voltage indicator LEDs will
flash rapidly instead. If this happens, you should get in touch with your service
contact as soon as possible.
Identified module
Error message
Screen: Diagnostics screen on monochrome display
Screen image: Shifted joystick
PM
PM
Module error Low Battery
66
Design and Function (R-net)
Error code
0506
2C00