Table of Contents
Advertisement
Transferring data with the infrared interface
The IrDA interface (Fast IrDA) on the back of the workstation allows wireless serial data
transmission from the workstation to a PC or printer. The infrared interface of the infrared keyboard
enables wireless data transmission to the workstation.
Infrared data transmission from device to device
By default the infrared port is set to COM2. You can change the setting in the Advanced Setup - I/O
Device Configuration - Serial Port B field in the BIOS Setup menu.
The IrDA port can only be used when the IrDA interface in the BIOS setup is switched on in
i
the Advanced Setup - I/O Device Configuration - Serial Port B field.
Ê
Set up the IrDA transmitter and receiver as illustrated above. The devices may be no more
than one meter apart.
The IrDA interface of one device must be in the range of influence (horizontally approx. 30° and
vertically approx. 15°) of the IrDA interface of the other device.
A26391-K82-Z110-1-7619
Connecting external devices
55
Advertisement
Table of Contents
