Table of Contents
Advertisement
Working with floppy disks
Working with floppy disks
Follow the instructions supplied by the vendor of the floppy disks.
!
1
1 = Insertion direction
2 = Label area
3 = Write protection tab for a 720 Kbyte or a 1.44 Mbyte floppy disk
4 = Hole for recognition of 1.44 Mbytes disk
5 = Eject button for inserted floppy disks
6 = Floppy disk is write-protected
7 = Floppy disk is not write-protected
Ê
To insert a floppy disk, push it into the drive in the insertion direction (1) until it engages. The
label should be facing upward.
Ê
To remove the floppy disk, press the eject button (5).
The write-protect slider enables you to protect the data on the floppy disk from inadvertent
overwriting or deletion.
Ê
To protect the data on the floppy disk from being overwritten, push the write-protect slider to
position (6). The hole is now visible.
Ê
To remove write protection, push the slider to position (7). The hole is now covered.
A26391-K82-Z110-1-7619
5
2
3
Preparation for use and operation
6
4
7
27
Advertisement
Table of Contents
