Switching The Pocket Pc Off And On During Normal Use (Standby Mode); Switching The Pocket Pc To Standby Mode; Switching On With The End Button; Entering Pin - Fujitsu Siemens Computers LOOX T Series Getting Started

Pocket PC operating
Switching the Pocket PC off and on during
normal use (Standby mode)

Switching the Pocket PC to Standby mode

► From the Today screen, briefly press the End button.
The Pocket PC is switched to Standby mode.
If you have specified a switch-off time in the system settings, your Pocket PC will
automatically switch to Standby mode after this specified time.

Switching on with the End button

► Briefly press the End key.
► If the device lock is activated, press and hold the Enter button afterwards.
The Pocket PC is switched on.

Entering PIN

If you are using a SIM card you will be asked to enter your PIN once the calibration process is finished.
Whenever you are asked to enter your SIM card PIN code, you can enter it using the
number block on the keyboard or via the touch-sensitive display on your Pocket PC.
► Enter the SIM card PIN code.
► Press Enter.

Using the keyboard

The keyboard is designed to offer all of the functions of a keyboard with an integrated number block.
Some enhanced keyboard functions are accessed via key combinations (short cuts).
Lower case letters are output by default.
To obtain a higher case letter, press and hold the corresponding letter button.
8 A26391-K182-Z100-1-7619, edition 2