Fujitsu Siemens Computers CELSIUS MOBILE 810 Operating Manual page 39

Operating the CD-ROM drive and the DVD drive
Inserting or removing a CD/DVD
The workstation must be switched on.
Ê
Press the insert/eject button for roughly one second.
The CD/DVD tray will open.
Ê
Pull the CD/DVD tray completely out.
Ê
Place the CD/DVD in the CD/DVD tray with the labeled side facing upwards, and carefully push
the CD/DVD into the mount or remove an inserted CD/DVD.
Ê
Push the CD/DVD tray in until you feel it locking into place.
Manual removal (emergency removal)
In the event of a power failure or damage to the drive it may be necessary to manually remove the
CD/DVD.
Ê
Switch off the workstation.
Ê
Press a piece of wire (e. g. a paper clip) firmly into the opening.
A26391-K82-Z110-1-7619
Preparation for use and operation
29