Dirt Devil Vacuum Cleaner Owner's Manual page 7

For additional filtration, a HEPA media exhaust filter is located below the dirt cup. For best performance, replace filter yearly.
TOOL REQUIRED: PHILLIPS SCREWDRIVER
HEPA filter part # 3-860057-000, is located below the dirt container.
NOTE: Unplug cleaner before changing filte~
NOTE: For best performance, replace filter yea*
For HEPA filter replacements call
1-800-321 -1 134 (USA & Canada).
Remove dirt container. To
remove the filter cover lid,
use a Phillips screwdriver
to remove the (1) screw.
Pull lid up and away from Grasp HEPA filter cartridge
cleaner. and pull up and out.
IMPORTANT: DO NOT
clean.To replace: Insert
HEPA filter into housing.
Replace screw and filter
cover.
This vacuum contains a permanent belt. If you experience problems with this unit, please call
1-800-321 -1 134 (USA & Canada) to locate the nearest Service Center.
1 .
TOOL REQUIRED: PHILLIPS SCREWDRIVER
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK
-
UNPLUG CLEANER BEFORE REMOVING OR REPLACING LIGHTBULB.
NOTE: This cleaner uses a common automotive lamp N06, 13.0 volts.
To purchase replacement bulbs, call
1-800-321 -1 134 (USA & Canada).
Lean cleaner back. Use a
Phillips screwdriver to
unscrew the two screws
located on each side of the
lens.
Pull bulb out of socket to
remove. Do not twist. Push
bulb into socket to replace.
Screw headlight lens back
into place.