Dirt Devil Vacuum Cleaner Owner's Manual page 5

Plug cord into electrical outlet.
Turn Quick Cord Release
for easy cord removal.
Store cord in cord guide
(see Features
-
pg. 4) to
keep out of way while in use.
BARE FLOOR CLEANING-
TURN BRUSHROLL OFF.
BARE FLOOR CLEANING
-
TURN BRUSHROLL OFF.
Turn the brushroll onloff switch
to the "off" position. This is
green switch located on the top
of the handle.
A ~ C H M E N T USAGE
Turn cleaner "onn. Switch locat-
Release handle by depressing
transport.
Use the convenient carry han-
ed on the top of handle.
pedal. NOTE: The brushroll will dle when lifting vacuum to
always be off when the handle
is in the upright position.
CARPET CLEANING-
TURN BRUSHROLL ON.
I
I
I
I
CARPET CLEANING -TURN BRUSHROLL ON.
ULTRA EDGER
As you switch to different carpet piles, depress the floor settings pedal until
Flip the ultra edger (located on
the desired height is selected. Using the height adust window (located on
the right side of the nozzle) so
the nozzle) to view height adjust setting. NOTE: Should the brushroll
the edge bristles face down.
become jammed with an obstruction, turn the brushroll odoff switch to the
The edge bristles provide effec-
"off" position, then turn the unit off and unplug. Remove the obstruction.
tive baseboard cleaning. Return
Plug unit back in, turn the power on and the brushroll on.
to stored position for normal
Remove the hose from the
The crevice tool and extension
side of the cleaner using the
wand are located on the b a a of
finger loop to lift out of storage
the upper handle. To remove,
position.
grasp tool at the top and pull out.
vacuuming.
I
I .
1
Pull crevice tool out of extension
To remove tool, lift up gently.
wand. Use extension wand and
Push the tool firmly on to the end
crevice tool together or separate-
of the hose. If additional length is
ly. NOTE: DO NOT use crevice
needed, use the extension wand.
tool while in extension wand.