System expansions
►
Pull the EasyChange rails off the empty slide-in module.
Do not dispose of the empty slide-in module. For cooling, protection against fire, and in
i
order to comply with EMC regulations, you must refit the empty slide-in module if you
remove the drive again later.
Do not dispose of the empty slide-in module. For cooling, protection against fire, and in
!
order to comply with EMC regulations, you must refit the empty slide-in module if you
remove the drive again later.
►
Take the new drive out of its packaging.
►
Adjust the required settings on the drive (if necessary, on already-installed drives as well).
46
A26361-K665-Z126-1-19, edition 1