Fujitsu Siemens Computers CELSIUS M430 Operating Manual page 17

► Depending on the connector, plug the monitor power cable into either the monitor socket of the
workstation (1) or the grounded mains outlet (2).
On units with a main power switch, we recommend that you connect the monitor to the
i
monitor socket of the workstation if possible. The monitor is then switched off
automatically when you switch the workstation off.
If the monitor is connected to a system without main switch it will not be switched off
together with the system. Switch off the monitor with its own ON/OFF switch.
The monitor power cable may only be connected to the workstation monitor socket if the
!
monitor current consumption is smaller than 1,5 A with 230 V or 3 A with 115 V. The
values for the monitor current consumption can be found in the technical data on the
monitor or in the operating manual for the monitor.
A26361-K665-Z126-1-19, edition 1
Preparing for use
1
1
2 2
9