Specifications; Assembly Instructions - RAIS Malta User Manual

Specifications

Single wall connector stove pipe – 6" (15cm) diameter
Chimney pipe – Class A, UL-103 HT, 6" (15cm) diameter
Optimal Thermal Output – 23,900 BTU (7 kW);
range is 6,800 - 27,300 BTU (2 - 8 kW)
Minimum stove draft pressure at above output – 0.06" WC (16 Pascals)
Efficiency – 74% based on DS standard
Tested EPA emission particulate rate – 4.18 grams/hour
Minimum distance to non-combustible material – 2" (5cm)
Note: Non-combustible must be solid cement or block (not brick or tile over
combustible material).
Minimum distances to combustible material – as shown:
B
E
# Description
A Distance to combustible side wall
B Distance to combustible back wall
C Corner distance to side walls
D Connector pipe to side wall
E Connector pipe to back wall
F Corner pipe to side walls
G Distance to furniture
H Front floor protection
I Side floor protection
Ceiling to top of stove
Ceiling to connector pipe
Note:

Assembly Instructions

The RAIS Malta and the RAIS Bora stoves come assembled. To add the Soapstone top
plate on the RAIS Malta, remove the steel top plate and replace with the Soapstone top
plate and the 2 bushings that are supplied. You may also just place the Soapstone top
plate directly on top of the steel plate. CAUTION: Soapstone is fragile, so please handle
with care.
The RAIS Bando soapstone panels come detached. To assemble, first check that all the
soapstone is in good condition. Then, attach the metal frames to the 2 soapstone side
panels, using the screws and washers that are included. Take care not to over-tighten.
5
Wall View
D A I
H
- Canada
A heat shield or protective wall may be used to reduce clearances if it meets the
Corner View
F
F
C,I
G
RAIS Malta RAIS
Bando
13"(33cm)
6"(15cm) 6"(15cm)
5"(13cm)
20.5"(52cm) 21"(53cm)
10" (25cm)
13" (33cm)
36" (91cm)
- US 16" (41cm) from door opening
18" (46cm)
8" (20cm) from door opening
36" (91cm)
18" (46cm)
C,I
H
G
RAIS Bora
5.5"(14cm)
20.5"(52cm)