F_Panel; Front Panel Jumper - Gigabyte GA-8S649MF-FS User Manual

8) F_PANEL (Front Panel Jumper)
Please connect the LED, reset switch and power switch etc. of your chassis front panel to
the F_PANEL connector according to the pin assignment below.
HD (IDE Hard Disk Active LED)
RES (Reset Switch)
PW (Power Switch)
MSG (Message LED/Power/Sleep LED)
NC
Message LED/
Sleep LED
2
1
IDE Hard Disk
Active LED
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Open: Normal Operation
Close: Reset Hardware System
Open: Normal Operation
Close: Power On/Off
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
NC
- 14 -
Power
Switch
10
5
Reset Switch
Hardware Installation