Maintenance; Print Head Maintenance; Roller Maintenance; Label Outlet Maintenance - Brother QL-1060N User Manual

Maintenance

Maintenance of the machine may be carried out as required. However, some environments require that
maintenance must be done more frequently (e.g. in dusty conditions).

Print head maintenance

The DK Roll (thermal printing paper type) used with the machine is
Print head
designed to clean the print head automatically. When the DK Roll
passes the print head during printing and label feeding, the print head
Roller
is cleaned. If the print head is not cleaned enough, use a cotton swab
and wipe the head.

Roller maintenance

Cut the DK label and remove the backing paper of the label. Then, put
the adhesive side of the label against the roller and remove the dirt.

Label outlet maintenance

If a label causes the machine to jam due to glue attached to the label
outlet, remove the power cord and clean the label outlet with a cloth
dipped into ethanol or isopropyl alcohol.
Label outlet
40 Print head maintenance