User File Uploading - Sena STS Series User Manual

Secure terminal server
Table of Contents

Advertisement

6.9. User File Uploading

User can upload his own file to the STS Series. But file uploading feature is only supported in console
menu. File uploading menu is located under "4. System administration --> 6. User file upload" of
console menu as shown on Figure 6-12.
To upload user file to the STS Series using console menu, user must use a TELNET/SSH or
terminal emulation program which supports Zmodem transfer protocol.
Uploading procedure is similar to firmware upgrade using console menu as follows,
1. Prepare user file to be uploaded.
2. Connect the terminal emulation program using either TELNET/SSH or a serial console
port.
(TELNET or SSH is recommended since the process of firmware upgrade by serial
console. Using a serial console port may take a long time.)
3. Select from the user file upload menu as shown Figure 6-12.
4. Follow the online directions and transfer the user file using the Zmodem protocol as
shown in Figure 6-10.
5. Once the upload has been completed, the system will display success messages as
shown in Figure 6-12.
6. If the upload fails, the STS Series will display error messages as shown in Figure 6-13.
Note :
User file uploading is permitted only under user space (/usr2) directory. For more information about
file system inside STS Series, please refer to 8.2 Flash partition section.
------------------------------------------------------------------------------
Welcome to STS-800 configuration page
Current time : 08/14/2003 11:56:13
Serial No.
: STS800438349-42944
IP mode
: DHCP
------------------------------------------------------------------------------
Select menu:
1. Network configuration
2. Serial port configuration
3. PC Card configuration
4. System administration
5. Save changes
6. Exit without saving
7. Exit and apply changes
8. Exit and reboot
<Enter> Refresh
---> 4
------------------------------------------------------------------------------
System administration
------------------------------------------------------------------------------
F/W REV.
: v1.0.0
MAC address : 00-01-95-04-d3-03
IP address : 192.168.222.206
83

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sts800Sts1600

Table of Contents