Sena STS Series User Manual page 19

field. This will direct the user to the STS Series login screen. The user must authenticate themselves
by logging into they system with a correct user name and password. The factory default settings are:
Login: root Password: root
Login: admin Password: admin
Note: Before accessing the STS Series Web management page, the user must check the IP address
(or resolvable Hostname) of the STS Series and Subnet mask settings.
Figure 2-10 Login screen of the STS Series web management
Figure 2-10 shows Login screen of the STS Series web management. After login, user can see the
configuration homepage of the STS Series Web management interface shown Figure 2-11.
Figure 2-11 shows the configuration homepage of the STS Series Web management interface. A
menu bar is provided on the left side of the screen. The menu bar includes the uppermost
configuration menu groups. Selecting an item on the menu bar opens a tree view of all the submenus
available under each grouping. Selecting a submenu item will allow the user to modify parameter
settings for that item. Every page will allow the user to [Save to flash], [Save & apply] or [Cancel] their
actions. After changing the configuration parameter values, the users must select [Save to flash] to
save the changed parameter values to the non-volatile memory. To apply all changes made, the user
must select [Apply Changes]. This option is available on the bottom of the menu bar. Only when the
user selects [Apply changes] will the new parameter values be applied to the STS Series configuration.
The user also can select [Save & apply] to save parameters and apply changes in one step.
If the user does not want to save the new parameter values, the user must opt to [Cancel]. All
changes made will be lost and the previous values restored.
19