6.4. Change Password
The password for the administrative users of STS Series can be changed.
6.5. Device Name Configuration
The STS Series has its own name for administrative purposes. Figure 6-5 shows the device name
configuration screen. When user changes Device name, hostname of STS series shall be changed
and then prompt on CLI also shall be changed to the corresponding one as follows,
root@STS800_Device:~#
Please note that user cannot set space character as one of device name. And If user sets blank
as Device name then hostname is set as IP address of STS series automatically.
And also the device name is utilized for management program, HelloDevice Manager.
6.6. Date and Time Settings
The STS Series maintains current date and time information. The STS Series clock and calendar
settings are backed up by internal battery power. The user can change the current date and time, as
shown in Figure 6-6.
There are two date and time settings. The first is to use the NTP server to maintain the date and
Figure 6-4 Changing the password
Figure 6-5 Device name configuration
77