Segway i2 SE User Manual page 90

Charging Your Batteries (cont.)
WARNING
Do not insert the Power Cord plug if the Charge Port, Power Cord, or AC Power
outlet is wet.
To charge the Batteries:
1. Put your PT in a clean, dry place, within the recommended charging
temperature range.
Open the Charge Port on the back of your PT's Console (see Figure
2.
57).
3. Verify that the Charge Port, Power Cord, and AC Power outlet are
clean, dry, and free of debris.
4. Plug one end of the Power Cord (provided with your PT) into a
grounded AC outlet (100V–240V; 50Hz–60Hz). The Power Cord
should be properly grounded (see Figure 57).
5. Plug the other end of the Power Cord into the Charge Port.
6. Verify that the two Charge Indicator lights on the Console illuminate
green to confirm the Batteries are charging (see Figure 58). For
more information on the Charge Indicator lights, see "Battery
Charge Indicator Lights," p. 89.
NOTE:
The PT's charging system automatically prevents overcharging. Plug your PT
into a grounded AC power outlet when it is not in use. If you do not plan to use
it for an extended period of time, visit your PT every month and remove and
reinsert the power cord to ensure the charging system is working properly.
88
Figure 57: Plug Power Cord into Charge Port
Figure 58: Battery Charge Indicator Lights
Charge Port
Front
Rear