Segway i2 SE User Manual page 145

Recommended Maintenance Schedule–i2 SE, x2 SE, x2 SE Turf (cont.)
Maintenance procedure:
Replace tires (see "Tire Wear" below), handle bar grips as necessary
Test ride PT, note wheel alignment, drift, or performance issues
Inspect elastomer and coupling (see SB 10-001)
Replace components and update software as necessary
Key:  = required; 2 = Performed by Level 2 trained Segway Certified Technician only; 3 = Performed by Level 3 trained Segway Certified Technician only
Tire Wear
Excess tire wear is determined as follows:
• Model i2 SE – center rib is worn flush with tire surface
• Model x2 SE – diamond pattern on center rib is no longer visible
• Model x2 SE Turf – tire tread depth is less than 3/32" (2.38 mm)
1x/month
2
3
1x/4 months 1x/6 months


1x/12 months




143