Recommended Maintenance Schedule-I2 Se, X2 Se, X2 Se Turf - Segway i2 SE User Manual

Recommended Maintenance Schedule–i2 SE, x2 SE, x2 SE Turf
Maintenance procedure:
Check LeanSteer installation and torque: 11 N-m
Check tire wear and pressure: i2 SE = 15 PSI; x2 SE = 4 PSI
Ensure rider mats are intact, secure, and free of debris
Inspect handle bar grips for proper installation/excessive wear
Inspect docking station for condition/functionality
Inspect fenders for cracks/obstructions/debris
Check operation of height adjustment knob
Power on PT. Ensure operability and document hours/miles
Check fastener torque: Handle bar clamp = 6 N-m
Check fastener torque: InfoKey dock = 2 N-m
Check fastener torque: Batteries = 1.6 N-m
Check fastener torque: Wheel = 30 N-m
Check fastener torque: Fascia/Parking stand = 1.5 N-m
Check fastener torque: Gearbox Trim = 6 N-m
Check fastener torque: Fender = 1.5 N-m
Function check: InfoKey operation
Function check: InfoKey battery level
Function check: Inspect LeanSteer for damage
Key:  = required, 2 = Performed by Level 2 trained Segway Certified Technician only, 3 = Performed by Level 3 trained Segway Certified Technician only
142
1x/month 1x/4 months
 
 
 
 
 
 
 
 










1x/6 months 1x/12 months
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 