GE Profile Performance ADVANTIUM SCA2000BAA Service Manual page 46

9. Remove the 3 screws securing the mag-
netron blower to the oven chassis and pull
upward on the motor while removing it
from the chassis.
HIGH VOLTAGE TRANSFORMER REMOVAL
To remove the high voltage transformer, follow
these steps:
1. Remove the oven from the wall plate.
2. Remove the outer case.
3. Remove the complete control panel as-
sembly.
4. Remove the upper halogen blower/lamp
assembly.
5. Remove the damper door assembly.
6. Remove the relay board/air guide assem-
bly and rotate it out of the way.
7. Remove the magnetron blower assembly.
8. Remove the magnetron tube.
9. Remove the 4 screws securing the high
voltage transformer and remove the trans-
former from the oven.
– 44 –