3. Object or liquid entry Do not allow foreign objects or liquids into the unit. If this happens, immediately disconnect the power cord from the wall and take the unit to an authorized music hall service center for inspection. 4. Heat Keep the turntable away from naked flames, radiators, heat registers, stoves, or any other heat-producing appliances (including amplifiers).
Page 3
11. Damage Requiring Service Stop using the turntable immediately and have it inspected by an authorized music hall service center whenever: 1. The power supply cord or plug has been damaged.
Page 5
Parts Inventory and Operation Control Diagram 1. 3 x removable transport screws 2. 1 x stepped motor pulley 3. 1 x drive belt (packaged in parts bag) 4. 1 x sub-platter 5. 1 x platter with felt mat (packaged in bottom of box) 6.
Please contact your authorized music hall dealer for any additional clarifications you may require. Save the music hall mmf-5.1se shipping carton and all enclosed packing material for future use. Shipping or moving the mmf-5.1se in anything other than the original packing material may result in severe damage that is not covered by the warranty.
Page 7
Save it for future use. 11. You will now set the cartridge tracking force. The mmf-5.1se comes complete with a factory installed Goldring cartridge. We recommend a tracking force of 1.75g.
Page 8
1.75 g is between 17 and 18g on the scale (6a). To set the tracking force you must first balance (zero) the tonearm (9). The objective of balancing or zeroing the tonearm is to get the tonearm to float parallel to the platter. First, lower the cueing lever (7).
Page 9
If you are substituting another cartridge for the supplied Goldring, you may need to make the following further adjustments to the tonearm (9) and cartridge: If you are a novice, music hall recommends getting professional help. All cartridges with half inch mounting holes can be fitted. Leaving the stylus guard on, fit the cartridge to the head shell (21) using the screws supplied with the cartridge by passing one screw through each slot in the finger lift and the head shell (21).
Page 10
If you have any further questions regarding the adjustment of your turntable, please contact your music hall dealer. Azimuth Adjustment: Azimuth is the angle of the stylus to the record groove. Viewed from head-on, you want the stylus to be perpendicular to the record groove so as to not favor one channel over the other.
You may need to go back and forth a couple of times to achieve the best setting. Please note that small changes in azimuth make a big difference in the sound. *Save all packing materials, parts, and screws for possible future transport* SITING FLOOR MOUNTING - Place the deck on a small, light, rigid table, e.g., coffee table.
Do not use the record clamp with 7-inch records. MAINTENANCE The mmf-5.1se is designed for a long operational life. To preserve the appearance of your deck and maintain its performance, you should note the following points: * Make sure the stylus guard is on before you begin cleaning *...
Platter bearing dry, dirty, or damaged. SERVICE Should you encounter a problem that you cannot solve, please contact your music hall dealer. Never return a record player without authorization and without safely disassembling it and correctly packing it in the original packaging. Repairs will only be made under warranty if the unit is returned correctly packaged.
WARRANTY This entitles you to have the music hall mmf-5.1se repaired free of charge, at our discretion, for one year after the date of purchase, at any authorized music hall service center, provided the unit was purchased from an authorized dealer. Your original sales receipt is proof of purchase date.
Need help?
Do you have a question about the mmf-5.1se and is the answer not in the manual?
Questions and answers