Advertisement
Advertisement
Table of Contents
Related Manuals for MUSIC HALL MMF-2.1
Summary of Contents for MUSIC HALL MMF-2.1
- Page 1 INSTRUCTION MANUAL music hall http://www.musichallaudio.com...
-
Page 2: Congratulations On Your Purchase
If the turntable is exposed to moisture, immediately disconnect the power cord from the wall. Take the deck to an authorized Music Hall service center for inspection. Do not touch the turntable, power cord, or plug with wet hands. - Page 3 12. Damage Requiring Service Stop using the turntable immediately and have it inspected by an authorized Music Hall Service Center whenever: 1. The power supply cord or plug has been damaged. 2. Liquid has been spilled onto the motor or into the bearing well.
- Page 5 19. 1 x belt changing tool (looks like a black plastic key), packaged in parts bag 20. 1 x on/off switch 21. 1 x head shell fitted with Music Hall Tracker cartridge 22. 1 x motor 23. 4 x feet...
-
Page 6: Getting Started
GETTING STARTED Thank you for purchasing the Music Hall MMF-2.1 turntable. It is a 2-speed belt- driven, audiophile turntable that comes complete with a Music Hall Tracker cartridge mounted in a high-quality tonearm. The alloy platter runs on a precision, stainless steel and bronze bearing assembly to provide fluid and quiet operation. - Page 7 Place it in a safe place for future use. 9. You are now going to set the tracking force. The MMF-2.1 comes complete with a factory installed Music Hall 'Tracker' cartridge. Acceptable tracking force for this cartridge is 1.5 - 2.25grams.
- Page 8 10. The tonearm has been adjusted at the factory to operate with the Music Hall 'Tracker' cartridge and no further adjustments of the tonearm or cartridge are necessary Set the anti-skating force for the cartridge as follows.
- Page 9 VTA positions slightly above or below parallel choosing the position you prefer. If you have any further questions regarding the adjustment of your turntable, please contact your Music Hall dealer. *Save all packing materials, parts, and screws for possible future transport.
-
Page 10: Mains Connection
MAINTENANCE The MMF-2.1 is designed for a long operational life. To preserve the appearance of your deck and maintain its performance, you should note the following points when cleaning (Make sure the stylus guard is in place before you begin): PLINTH - The plinth is constructed from medium density fiberboard, therefore it should not be subjected to extremes of temperature or direct sunlight. -
Page 11: Technical Specifications
9 in.(22.9 cm) Overhang: .67 inch (17mm) Platter diameter: 11.81 in.(30cm) Platter weight: 4.5 lbs.(1.7kg) Dimensions: 16.75 x 12.6 x 4.33 in. (415 x 230 x 110 mm) Weight (including pkg.): 17lbs.(7.8 kg) Music Hall reserves the right to make technical modifications. -
Page 12: Troubleshooting
TROUBLESHOOTING Music Hall turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory. If, for some reason your turntable is not working properly, please take a few moments to review this list of potential causes. -
Page 13: Claims Under Warranty
Center, provided the unit was Fax: 516-773-3891 http://www.musichallaudio.com purchased from an authorized dealer. Your original sales receipt is proof of purchase date. Music Hall takes no responsibility for defects arising from accident, misuse, abuse, wear and tear, neglect or unauthorized repair and/or adjustment.
Need help?
Do you have a question about the MMF-2.1 and is the answer not in the manual?
Questions and answers