Network Ports - HP ProCurve Series 6600 Installation And Getting Started Manual

PS, Tmp, Fan, and
Power,
Fault, and Test Status LEDs
locator
LEDs
Out of Band
Management port,
for future use
Port LED Mode select
Console port button and indicator LEDs
Reset and Clear
buttons
Figure 1-3. ProCurve 6600-24XG Switch

Network Ports

■
■
■
Auxiliary port
and LED
On the 6600-24G and 6600-24G-4XG Switches there are 24 auto-sensing
10/100/1000Base-T ports. All these ports have the "Auto MDIX" feature,
which means you can use either straight-through or crossover twisted-
pair cables to connect any network devices to the switch.
On the 6600-24G and 6600-24G-4XG Switches there are four dual-person-
ality ports. Use either the 10/100/1000Base-T RJ-45 connector, or install a
supported ProCurve mini-GBIC for fiber-optic connections.
Dual-Personality Port Operation. By default, the RJ-45 connectors are
enabled. If a mini-GBIC is installed in a slot, it is enabled and the associ-
ated RJ-45 connector is disabled and cannot be used. If the mini-GBIC is
removed, the associated RJ-45 port is automatically re-enabled.
On the 6600-24XG Switch there are 24 SFP+ 10-GbE ports. SFP+ ports
only support 10 Gbps operation; 1 Gbps mini-GBICs are not supported in
any SFP+ port.
Introducing the Switch
Front of the Switch
Link and Mode LEDs
SFP+ 10-GbE ports
1-5