HP Surestore fc 1Gb/2Gb switch 16B Installation And Reference Manual page 18

2
Installing and Configuring the HP Surestore FC 1Gb/2Gb Switch 16B
Figure 2-4. Installing the Tinnerman Clips (HP Rack)
– For a Compaq/Rittal rack, install (2) #10-32 square Tinnerman nuts for each of the
Figure 2-5. Installing the Tinnerman Nuts and Spacers (Compaq/Rittal Rack)
2-6
front columns of the rack in the top and bottom positions of the three-hole EIA
pattern. Also install (1) spacer in the center position for each column on the front of
the rack. See Figure 2-5.
HP Surestore FC 1Gb/2Gb Switch 16B Installation and Reference