2
Installing and Configuring the HP Surestore FC 1Gb/2Gb Switch 16B
The following items are required to install the switch in a rack:
• FC 16B
• Power cables
• #2 Phillips and T25 Torx screwdrivers
• Rails and rail mounting hardware:
CAUTION For proper airflow, the SFP media side of the FC 16B faces the rear of the
rack. This mounting allows air to enter from the front of the rack and to exhaust at the rear
of the rack, which is similar to other rack-mounted equipment.
2-4
(2) Rear mounting bracket
(6) #8-32 x 5/16 Phillips pan-head screw with captive star lock
washer
(6) #8 Flat washer
(6) M5 Torx head screw with captive lock washer
(2) Rubber washer
(4) M5 U-type Tinnerman clip (HP rack only)
(4) #10-32 square Tinnerman nut (Compaq/Rittal rack only)
(4) #10-32 x 5/8 Phillips pan-head screw with attached lock
washer (Compaq/Rittal rack only)
(6) Spacer (Compaq/Rittal rack only)
(4) M5 flat washer (Compaq/Rittal rack only)
HP Surestore FC 1Gb/2Gb Switch 16B Installation and Reference