Zp80 - How To Set Up Your Music System - Sonos Digital Music System User Manual

Chapter 2: ZonePlayer Setup and Operation

ZP80 - How to Set Up Your Music System

Follow the step-by-step instructions to ensure that you set up your ZonePlayer ZP80(s)
correctly.
• If you should experience any difficulty during the setup process, please go to
www.sonos.com/support for additional help.
• The first ZonePlayer you set up should connect to your home network using a
standard Ethernet cable (supplied). If your computer only has a wireless connec-
tion, visit our Web site at http://faq.sonos.com/wireless.
If you are setting up a new Sonos system
Step 1: Attach the power cord and plug in the ZonePlayer ZP80.
Step 2: Connect a standard Ethernet cable (supplied) from either of the two (2)
Ethernet switch connectors on the back of your ZonePlayer ZP80 to an open port on
your router (see A in the diagram below). Do not connect the ZonePlayer directly to
your cable or DSL modem unless your modem has a built-in router.
If you don't have a router, go to http://faq.sonos.com/norouter for instructions.
If you don't have an open port on your router, you can disconnect your computer from
the router and connect it to the ZonePlayer ZP80 instead. Then connect the
ZonePlayer into the router port the computer was previously plugged into.
2-5