Sonos Digital Music System User Manual page 32

2-14
ital Music System by selecting Zones>Set Up Zones>Add.
• Use the Sonos Controller to add the ZonePlayer to your Sonos Digital Music
System by selecting System Settings>Add a ZonePlayer from the Music
menu.
To control the volume from home theater
Set the line-out level on this ZonePlayer to Fixed by selecting one of the following
options:
• Using the Desktop Controller software, select Set Up Zones from the Zones
menu. Select the ZonePlayer attached to your home theater, and then click Set-
tings. Click the Line-Out tab, and choose Fixed.
• Using the Sonos Controller, from the Music menu, select System Settings. Se-
lect ZonePlayer Settings, and use the scroll wheel to highlight the ZonePlayer
attached to your home theater. Select Line-Out Level, and choose Fixed.
Note: When you change the line-out level to Fixed on your ZonePlayer, you will not
be able to adjust the volume or the equalization settings using your Sonos
Controller.
To control the volume from Sonos system
1. Adjust your home theater or other audio device's volume to typical listening
volume.
2. Set the line-out level on this ZonePlayer to Variable by selecting one of the
following options:
• Using the Desktop Controller software, select Set Up Zones from the Zones
menu. Select the ZonePlayer attached to your home theater, and then click Set-
tings. Click the Line-Out tab, and choose Variable.
• Using the Sonos Controller, from the Music menu, select System Settings. Se-
lect ZonePlayer Settings, and use the scroll wheel to highlight the ZonePlayer
attached to your home theater. Select Line-Out Level, and choose Variable.
3. Use the Controller to adjust the volume on your Sonos system so you can hear
music. This may be at the high end of the volume scale.
4. If desired, you can readjust the volume on your home theater system so that the
volume range for the Controller falls within your typical listening range.
Chapter 2: ZonePlayer Setup and Operation