Sonos Digital Music System User Manual page 135

Chapter 5: Your Sonos Controller
• Use the scroll wheel to select each letter, pressing OK after each entry.
• Press Accept to accept the new name, or press Cancel to leave the screen with-
out making a change.
White status indicator light
If you have a ZonePlayer located in a bedroom, you may want to turn off the white light
located on the front of the ZonePlayer. This means that while the ZonePlayer is in
normal operation, the white light will be off. However, if the ZonePlayer Status Indicator
Light begins to flash amber, see ZonePlayer Status Indicator Explanations for additional
information.
ZonePlayer Status Indicator
LED; white when in normal
operation
1. From the Music menu, select System Settings
OK.
2. Use the scroll wheel to select a zone, and press OK.
3. Select White Status Indicator Light, and press OK.
4. Select On or Off and clickOK.
Line-In source name
1. From the Music menu, select System Settings>ZonePlayer Settings and press
OK.
2. Use the scroll wheel to highlight the zone the audio component is connected to,
and press OK.
3. Select Line-In Source Name, and press OK.
4. Choose a new name from the list, and press OK, or select Enter New to type a
unique name.
>
ZonePlayer Settings and press
5-27