Adding More Sonos Components - Sonos Digital Music System User Manual

2-8
If you are adding to an existing Sonos system
Note: If you want to replace the wired ZonePlayer in your music system with a
ZonePlayer ZP80, first add the new ZonePlayer ZP80 to your music system (steps
below). You can then unplug the wired ZonePlayer, replace it with the ZP80, and
move the original ZonePlayer to a new location.
Step 1: Attach the power cord and plug in the ZonePlayer ZP80.
Step 2: If you are making a wired connection, connect a standard Ethernet cable. If you
are making a wireless connection, skip this step and continue.
Step 3: Choose one of the following options:
• Use the Sonos Controller to add the ZonePlayer ZP80 to your music system by se-
lecting System Settings>Add a ZonePlayer from the Music menu. Or,
• Use the Desktop Controller software to add the ZonePlayer ZP80 to your music
system by selecting Zones>Set Up Zones>Add.
Step 4: Attach the ZonePlayer ZP80 to an external amplified device. See "Using Line-
out" on 2-13.

Adding More Sonos Components

Add A ZonePlayer
If your house has structured (built-in) wiring, you can make a 'wired' connection to an
additional ZonePlayer. Otherwise, make a wireless connection.
Caution: Do not place any items on top of your ZonePlayer. This may impede the air
flow and cause your ZonePlayer to overheat.
1. Place the ZonePlayer in the room you have selected.
2. If you are making a wired connection, connect a standard Ethernet cable from
either your router, another ZonePlayer, or a 'live' network wall plate to any of the
Ethernet switch connections on the back of the new ZonePlayer. If you are making
a wireless connection, proceed to step 3.
Chapter 2: ZonePlayer Setup and Operation