Wireless Setup - D-Link DCS-2332L User Manual

Section 4: Configuration
This section allows you to set up and configure the wireless settings on your camera. After making any changes, click the Save Settings button to
save your changes.
Site Survey:
Wireless Mode:
Channel:
Authentication:
Encryption:
Default Key:
D-Link DCS-2332L User Manual
Click the Rescan button to scan for available wireless
networks. After scanning, you can use the drop-down
box to select an available wireless network. The related
information (SSID, Wireless Mode, Channel, Authentication,
Encryption) will be automatically filled in for you.
SSID:
Enter the SSID of the wireless access point you wish to
use.
Use the drop-down box to select the mode of the
wireless network you wish to connect to. Infrastructure
is normally used to connect to an access point or router.
Ad-Hoc is usually used to connect directly to another
computer.
If you are using Ad-Hoc mode, select the channel of the
wireless network you wish to connect to or select Auto.
Select the authentication you use on your wireless
network: Open, Shared, WPA-PSK or WPA2-PSK.
If you use WPA-PSK or WPA2-PSK authentication, you
will need to specify whether your wireless network
uses TKIP or AES encryption. If you use Open or Shared
authentication, WEP encryption should be the setting.
If you use WEP, WPA-PSK or WPA2-PSK authentication,
enter the Key (or password) used for your wireless
network.

Wireless Setup

DCS-2332L
52