Wireless Setup - D-Link DCS-931L User Manual

Section 3 - Configuration
This section allows you to set up and configure the wireless settings on your camera.
Enable Wireless:
Check this box to allow your camera to connect to your network wirelessly.
Enter the network name(SSID) of the wireless network you want to connect
SSID:
to. You can also click the Site Survey button below to choose an available
network and fill in settings automatically.
If you are using Ad-Hoc as your connection mode, select the same channel
Channel:
that is being used by your wireless network.
Connection
Select the connection mode used by your wireless network. In most cases,
Mode:
you should select Infrastructure. Ad-Hoc is only used if your camera is
directly connecting to another PC or device.
Site Survey:
Click this button to select an available wireless network to connect to.
Wireless
Select the wireless security mode used by your wireless network. If you
Security Mode:
select WEP or WPA-PSK/WPA2-PSK, enter the password for your wireless
network in the text box that appears.
D-Link DCS-931L User Manual

Wireless Setup

25 25