Removing The Bottom Panel; Using The Reset Button - D-Link DCS-2332L User Manual

Section 1: Product Overview
Step 1:
Place the camera face down on a non-slip flat surface.
Step 2:
Carefully pry out the two protective rubber screw coverings using a thin flat blade.
Step 3:
Undo the two screws using a Phillips Screwdriver.
Step 4:
Lift off the protective panel.
Step 1:
Follow the steps outlined above in Removing the Bottom Panel.
Step 2:
Using a paperclip or similar tool, press and hold the Reset Button for 10 seconds. This will
reset the device to it's factory settings.
Step 3:
Follow the steps outlined in Reattaching the Bottom Panel on page 16.
D-Link DCS-2332L User Manual

Removing the Bottom Panel

Using the Reset Button

2
3
4
2
15