Logging In To Smu From A Local Management Host; Updating Firmware; Setting The Date And Time - HP StorageWorks 2012i User Manual

Logging in to SMU from a Local Management Host

To log in to SMU from a local management host:
1. In your web browser's address field, type the IP address of one of the controller
enclosure's Ethernet management ports and press Enter.
The SMU Login page is displayed. If the Login page does not display, verify that
you have entered the correct IP address.
2. On the login page, type the default management user name
password
3. Click Log In.
The Status Summary page is displayed.

Updating Firmware

After installing the hardware and powering up the enclosure for the first time, be
sure to verify that the controllers and drive enclosures have the latest firmware.
SMU enables you to view the software, hardware, and other version information for
each controller and the enclosures. To view controller version information, select
Monitor > Status > Advanced Settings > Controller Versions.To view drive
enclosure information, select Manage > Update Software > Enclosure Firmware >
Show Enclosures.
For software and firmware updates, go to
MSA SAN Arrays, select your product, and go to Support.

Setting the Date and Time

You can set the date and time manually or configure the system to use Network
Time Protocol (NTP) to obtain them from a network-attached server. When NTP is
enabled, and if an NTP server is available, the system time and date can be obtained
from the NTP server. This allows multiple storage devices, hosts, log files, and so
forth to be synchronized.
50 HP StorageWorks 2012i Modular Smart Array user guide • March 2008
.
!manage
manage
http://www.hp.com/go/msa
and default
. Select