Table of Contents
Advertisement
Installation Checklist
Table 1-9 outlines the steps required to install the enclosures and initially configure
the system. To ensure a successful installation, perform the tasks in the order they
are presented.
Table 1-9 Installation Checklist
Step
Installation Task
1.
Prepare the rack for installation.
Install the controller enclosure and optional drive
2.
enclosures in the rack.
3.
Attach the ear caps.
4.
Connect the enclosures.
5.
Connect the power cords.
6.
Test the enclosure connections.
7.
Obtain IP values.
8.
Install required host software and drivers, including:
• HBA drivers
• iSCSI Software Initiator
• MSA2000 Family SES Driver
Where to Find Procedure
"Preparing the Rack" on page 27
"Rack Installation Overview and
Procedure" on page 28
"Attaching the Ear Caps" on page 31
"Connecting Controller and Drive
Enclosures" on page 32
"Connecting AC Power" on page 35
"Testing the Enclosure Connections" on
page 36
"Obtaining IP Values for Your Storage
System" on page 37
"Host System Requirements" on page 39
Chapter 1 Before You Begin
23
Advertisement
Table of Contents
