Table of Contents
Advertisement
Your package contents include a micro-DB9-to-DB9 serial cable. If necessary, use a
DB9-to-DB25 adapter (not included) for connecting the serial cable to a DB25
serial port on the host computer.
2. Start and configure a terminal emulator, such as HyperTerminal or VT-100, using
the display settings in Table 4-1 and the connection settings in Table 4-2.
Table 4-1 Terminal Emulator Display Settings
Parameter
Terminal Emulation Mode
Font
Translations
Columns
Table 4-2 Terminal Emulator Connection Settings
Parameter
Connector
Baud rate (bits/sec)
Data bits
Parity
Stop bits
Flow control
Value
VT-100 or ANSI (for color support)
Terminal
None
80
Value
COM1 (typically)
115,200
8
None
1
None
Chapter 4 Configuring a System for the First Time
47
Advertisement
Table of Contents
