RESEARCH CONCEPTS RC3000 User Manual page 42

RC3000 Antenna Controller Chapter 2 Installation
The RC3000HRC places all of the antenna move functions and antenna limit indicators into the operator's
hand. The LEDs on the remote switch-pad indicate the antenna limit status:
Azimuth Axis: STOW, CCW Limit, CW Limit.
Elevation Axis: STOW, Up Limit, Down Limit.
Polarization Axis: CCW Limit, CW Limit.
When the COMP/MANUAL SELECT switch is at MANUAL, control of the azimuth, elevation and
polarization axes is via the handheld remote panel. The SELECT and MOVE switches may then be used
to configure and initiate movement of one of the three (azimuth, elevation or polarization) axes. Moving
the switch back to the COMP position returns control to the RC3000's frontpanel.
34