Table of Contents
Advertisement
To Nº33x Slave Out
To Nº33x Slave In
Locking tab
Locking tab
6-Conductor Amp-Amp Link Cable
In this case, we use pins 1-6 of the eight-pin connector in a "straight-through"
connection, and leave pins 7-8 empty .
Using the latest software
As we add features and functionality to the Link system, we sometimes need to
update associated software. If you are Linking a system with one or more older
components (early Nº38's, Nº30, Nº31, etc.), you may need to have your dealer
replace a socketed EPROM in order to install the current version of that product's
software. If you think you may need new software, please contact your dealer
with the software code numbers of all Nº30 Series units in the system. This infor-
mation is typically shown during power-up as the word CODE followed by a
combination of four numbers and/or letter. (Your dealer should be able to help
you with this.)
51
Advertisement
Table of Contents
