Basic Operation; Loading A Cd; Temporarily Overriding A Previously Saved Program; Playing All Tracks In Order - Madrigal Audio Mark Levinson N31.5 Operating Manual

Reference cd transport
Table of Contents

Advertisement

Loading a CD

Temporarily overriding a
previously saved program

Playing all tracks in order

Beginning play with other
than the first track

Replaying a track

Basic Operation

Before operating your Nº31.5, become familiar with its controls and their loca-
tions. (See Front Panel, Top Panel, CD Transport Assembly, and Remote Control.)
To load a CD for play:
1. Make sure that the
main power
2. Enable the Nº31.5's controls by pressing
3. Press
Lid Open/Close
4. Remove the Disc Damper from the spindle.
5. Place a CD onto the spindle, label side up. Handle the CD by the
outer edges only .
6. Place the Damper on top of the CD. Make sure that it's centered
and seated securely .
7. Close the Lid by pressing
In a few seconds, the display will show the total number of tracks and their total
playing time. The CD is now ready for play .
Note: If you have previously saved a program for the CD, the letter
preceding the track number on the display . (See Programming.)
To override a previously saved program, press
Control, press the
(zero) numbered key, then press
0
tracks will be accessible for basic operation, but the program will still be retained
in the Nº31.5's memory .
To play all tracks on the CD, press the play button. All tracks will play in order.
Play will stop automatically at the end of the CD.
To begin play with a track other than the first track:
1. Before pressing
play
track shows on the display (
track you want to play , you can "back up" by pressing
(
on the remote). Y ou may also select the track using the
track –
numbered buttons on the Remote Control.
2. Press
to begin playing that track. The remaining tracks will
play
play in order. Play will stop automatically at the end of the CD.
To return to the beginning of a track while it's playing, press
suspended briefly, then that track will replay followed by the remaining tracks on
the CD.
switch is set to the "|" position.
standby
to open the Lid.
again.
Lid Open/Close
program clear
, press
until the number of the desired
next
on the remote). If you pass the
track +
.
will appear
P
; or on the Remote
. All of the CD's
prg/time
previous
. Play will be
play
37

Advertisement

Table of Contents
loading

Table of Contents